24/7 Call us on 0402 290 290

Fixing hot water heater pilot light

Very few of us know a ton about water heaters or water heater repair. Notwithstanding, it is something that each property holder need to manage around then or an alternate since no water warming unit keeps ticking for eternity. Deciding whether you might as well repair your water heater or purchase another one depends exclusively on what isn’t right with it in any case. The following is a rundown of issues and what the best result is for each.


Leaks. Practically dependably, holes could be altered quite effortlessly. The break will normally originate from one of three spots – the drain valve, the channels or the tank. The drain valve is the most straightforward fix. You can essentially tighten it and as a rule the break will stop. Assuming that the break is hailing from the channels, examine the fittings and tighten every one. In the event that the break holds on, the hole is probably being initiated by an opening or split in one of the funnels because of erosion. This is a moderately simple fix and is worth the trouble to do due to the generally little cost, regardless of the fact that you need to contract an expert. Finally, if the hole is originating from the tank, the tank in all likelihood requirements to be traded. By and large talking, obtaining another one is doubtlessly the best alter here.


Water that is excessively hot or excessively frosty. This is normally initiated by a defective temperature weight easing valve. This valve should stop the water heater’s warming component once the water achieves a certain weight. In the event that this valve is defective, it might be unsafe as a result of the reproving high temp water the unit could generate, in addition to the way that the unit could blast because of advanced weight. Make a point to call an authorized repairman to review your unit.


Pilot light. Assuming that the pilot light continues going out on your gas water heater, the issue is fixing hot water heater pilot light and no doubt with the hole. Clear it from any soil or garbage. The issue could likewise be with the thermocouple. Assuming that this is the situation, it won’t take a lot to reinstate it. Assuming that you are convenient, you could even do it without anyone else’s help.


Water not hot enough. Assuming that the boiling hot water being handled is not hot enough or not hot whatsoever, the issue is doubtlessly with the warming component. In the event that this is the situation, purchasing another one is most likely the best alternative since repair will be costly.